Mamiya C330f Professional Specifications download pdf (Page 23)

After changing a lens, set the par-

allax correcting dial (25) to the focal

length value of the mounted lens.

Regarding 55mm and 65mm lenses,

set the parallax correcting dial to 80.

then attach the parallax correction

plate for 55mm/65mm lenses to the

focusing hood. (Refer to p. 15 for

handling method of the focusing

hood).

Concerning the 250mm lens, set

the parallax correcting dial to 180.

PRECAUTIONS

1. If the film wind crank is not kept positioned

diagonally upward, (the same angle as the

crank housing position), the cocking lever (17)

cannot be connected with the cocking lever on

the camera body.

2. Regarding the cocking lever on the 180mm

lens, an auxiliary lever for connection is provided

on the side of the lens barrel. Since this lever

is constantly pushed upward by a spring, when

mounting the lens, hold the auxiliary lever

downward with a finger tip to prevent obstruct-

ing installation.

3. When the lens change knob (24) is in the

“UNLOCK” position, the portion to which the

picture taking lens (lower lens) is attached is

protected by a cover from the camera interior

to shield the film from exposure to light, and

a red warning signal is visible on the focusing

screen surface.

Should this cover be pushed while removing the

lens, light will strike the film.

Never push it.

4. After changing a lens, turn the lens change

knob (24) to the “LOCK” position; otherwise,

the shutter release button cannot be depressed.

22

1 2 ... 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments