Mamiya DM System User Manual download pdf (Page 78)

Chapter 1 - Basic info

Chapter 6 - Exposure Modes



When in situations where it is difﬁcult to determine the best exposure compensation, it is advisable

to change the exposure setting gradually (from normal to under and over). Continuous turning up

of the values eventually leads to auto bracketing.



After multiple turns, the mark “RP” will appear in the main LCD.



Repeat turning will lead to a countdown being displayed on the main LCD and after taking a

photo the camera will return to auto bracketing mode.

1. Turn the shutter release mode

selector lever to the “S” or “C”

position.

When set at the “S” position, one frame

can be shot with each press of the

shutter release button. In the “C” mode,

the camera takes three (or two) frames

successively with one press of the shutter

release button.

2. By pressing the auto bracketing

button, auto bracketing mode is

selected.

In the main LCD, the auto bracketing mark

will ﬂash on and off. As it is ﬂashing, turn

the front

dial to “On”.

3. By further turning, more values can

be selected.

The rear dial can also be used for setting.

From 1 to 10 turns the value increases in

single units, while 10 to 60 turns means

increases by units of 10. “On” allows

unlimited values to be set.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 201 202

No comments

Mamiya DM System User Manual Page 78