Mamiya 645DF Specifications download pdf (Page 10)

17 18

80mm

1:28

80mm

1:28

80mm

1:28

2. Attaching the lens

Line up the lens mount alignment mark with

mark on the camera to fit the lens in place,

then rotate it in the direction of the arrow until it

clicks into place.

Removing

While sliding the lens release button back ,

rotate the lens counter clockwise until it stops

and lift it off.

After removing the lens from the camera body, protect both ends by attaching the

caps.

Oil, dust, fingerprints or water on the electronic contacts could result in

malfunction or corrosion. Wipe such impurities off with a clean piece of cloth.

Do not touch the distance ring or other rotating parts when attaching the lens.

When installing a lens, do not press the lens release button .

Attaching and Removing a Lens

Attaching

1. Remove the front body cap, just like

you would remove a lens, by pushing

the lens release button

backward

and then turn the front body cap

counter clockwise and lift out.

To remove the front lens cap, squeeze the shiny

sections together and lift out.

To remove rear lens cap turn it counter clockwise.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 52 53

No comments

Mamiya 645DF Specifications Page 10