Mamiya 645DF Specifications download pdf (Page 40)

77 78

If the flash-charge mark is not displayed, the flash compensation button can

not be used.

Keep pressing the set button to activate the flash compensation mode. You can

check the exposure compensation value.

If you turn the shutter release mode selector lever to the “L” (power OFF) position,

the compensation value will be canceled.

External LCD Panel (normal display)

Viewfinder LCD read-outs.

4. When the shutter button is half-pressed, the

“ ” display appears on the external LCD, and

“ ” appears on the LCD inside the viewfinder

with a + compensation, or “ ” appears with a

– compensation.

Flash Compensation Settings (continued)

The selected shutter speed and aperture level can be locked.

See page 71

Flash Photography with electronic flash models other

than Metz

1. To use a grip type flashgun or a strobe with

other electric contacts than X contact, connect

the sync. cord to the camera’s sync. terminal.

(See note below about flashes designed

exclusively for other maker’s cameras.)

2. While pressing the unlock button, turn the exposure mode setting dial and set it to

“X” (1/125 sec.) or “M” (manual).

When “M” (manual) is selected, turn the front dial and set the shutter speed 1/60 to 1/

125 sec. or slower.

3. Turn the rear dial to set the aperture, then take the picture. (for “M”, use the rear

dial. For “X”, use the front dial).

This camera’s synchro contact is an X contact.

Remove the rubber cover when connecting the sync. cord.

After shooting, be sure to reattach the rubber cover in order to protect the synchro

terminal’s contacts.

WARNING

- Using flashes designed exclusively for other maker’s cameras may

damage the camera’s internal mechanisms if connected to the

camera's hot-shoe. In this situation, use an off-camera flash bracket

and connect a sync. cord to the camera's synchro terminal.

- When using flashes with a flash duration of 1/500 sec. or longer, set

the shutter speed to 1/30 sec. or less.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 52 53

No comments

Mamiya 645DF Specifications Page 40