Mamiya 645DF Specifications download pdf (Page 8)

M.UP

Checking the Battery Power

Set the drive dial to “S” to turn on the power.

Check the battery condition in the lower right corner of the main LCD.

When replacing the batteries, be sure to use six new batteries of the same type. Do

not mix different types of batteries or old batteries with new ones.

The batteries are sufficiently charged.

There is little power remaining. Have new batteries on hand.

Camera will still operate.

There is very little power remaining. Camera will stop

operating soon.

Flashing

Set the drive dial to “L” to turn off the power.

Use six “AA” alkaline or lithium batteries.

1. Lift the battery case lock lever, turn it counter

clockwise and pull out the battery holder.

2. Install the batteries while ensuring their

polarities are properly aligned with the and

markings on the battery case.

3. Return the battery holder to its case and lock it

by turning the lever clockwise. Make sure it is fixed

firmly in place.

Be sure the batteries are placed with proper

polarity

Inserting the Batteries ( )

Rechargeable nickel-metal hydride (Ni-MH) or nickel-cadmium (-Cd) batteries

can be used. Custom settings (C-04 on page 84)

If the battery type and setting do not match, remaining battery power will not be

displayed.

Set the shutter release mode selector lever to “L”

(to turn the power off) and replace the batteries

with new ones.

When the batteries are spent, “batt” flashes on the

main LCD and the viewfinder's LCD when the

shutter release button is pressed.

The camera will not operate

without batteries

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 52 53

No comments

Mamiya 645DF Specifications Page 8