Mamiya 645 AFD III User Manual download pdf (Page 12)

6. After the index number is specified, press the set button A for approximately one

second to store the setting.

★ In the default setting the index number is not imprinted. Change the setting in C-02 of

the custom setting mode (see page 93). If film is not loaded, the index number will not

change.

★ The starting index number can be set at will. For example, when shooting in different

places or for different purposes, you can classify the photos by changing the start-

ing number of any of the digits.

★ Once the last three digits reach 9999, they will restart from 0000 and the thousands

place will be increased by one. 0000 can also be set using the index number setting

procedure.

★ After 60 seconds, the index number setting mode is cancelled and the setting is not

registered to the camera’s memory unless the set button has been pressed.

★ Custom settings remain in the memory even when the shutter release mode selector

lever is set to “L” (turning the power off).

★ When the exposure mode is not set to the CF position and you press the set button

for approximately 2 seconds, you can check the index number for the next frame.

Pressing the set button again will let you to check the “month-date-year” and “hour-

minute” settings.

How to imprint the same index number

It is possible to always imprint the same index number that has been previously set.

The procedure is the same as that taken up to

step 4. of the index number setting procedure.

1. Turn the front dial until “UP” starts blinking.

2. Turn the rear dial until “HL” is displayed.

3. Press the SET button A for about 1 second to

enter the setting.

21 22

The index numbers are indicated in four digits (0000 to 9999).The index number is stored

in the camera body so that when replacing a series of roll film holders, the camera will

superimpose sequential index numbers on exposures. This is effective when exposing

and managing a large number of rolls of different types of film.

1. Turn on the power.

Set the shutter release mode selector lever to “S”

or “C.”

2. Press and hold down the exposure mode dial

lock-release button. Then, turn the exposure

mode dial to the CF position.

3. Turn the front dial to select custom number C-

35.

The display turns from “C-35” to “Id” immediately.

★ The dial can be turned either way to select the

desired function number.

4. Press the set button

After pressing the set button A you will see the

index setting display.

5. Turn the front and rear dials to set the index

number. (4 digits). Turn the front dial to select a

digit in the index number (the selected digit blinks)

and then change the number by turning the rear

dial.

★ If you st ore the setting with “HL” blinking, the

specified index number wil l be s uperimposed

on eve ry frame. Set to “UP” if you wish the in-

dex number to be incre ased after eac h shot.

Setting the Index Number

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

Comments to this Manuals

No comments

Mamiya 645 AFD III User Manual Page 12

Comments to this Manuals

Related products and manuals for Cameras Mamiya 645 AFD III