Mamiya 645 AFD III User Manual download pdf (Page 16)

Caution

: When the pressure plate (120/220) is set erroneously

■ When the pressure plate setting does not correspond to the loaded film a mis-

match between the pressure plate setting and loaded film may result in a focusing

error and/or camera malfunction. Always ensure that the pressure plate setting

corresponds to the loaded film.

4. Attach the empty spool to the

roll-film insert.

Flip open the backing plate E of the lower com-

partment, fit an empty spool to the bearing, and

push the backing plate F back to the original

position.

5. Set a film.

Flip open the backing plate G of the upper com-

partment, set a new roll of film as shown, and

return the backing plate G to the original posi-

tion.

Result

220 type

120 type

120

220

- Inaccurate focusing.

- Film winding after 16 exposures.

- Inaccurate focusing.

- After the 16th exposure has been made, the shutter can be released a

few times until the film's leader paper has run out, but the shutter

blades may be damaged by the leader paper at the film end or by the

film's sticker.

Insert the dark slide in the magazine and press the shutter button and

the emergency film wind button simultaneously. (See page 40)

Plate

Setting

Loaded

Film

Loading Film in the Magazine

1. Open the back cover of the

magazine.

Hold down the A button and press the B button

to the right.

2. Take out the roll-film insert.

Pinch the knobs C of the roll-film insert in the

chamber with your fingers and take out the roll-

film inset.

■ When you load a film in the magazine for the

first time, remove the protective paper which

is attached to the pressure plate of the roll-

film insert.

3. Set the film type (120 or 220).

Hold the button D under the knob and turn the

pressure plate. This frees the pressure plate and

permits it to be turned and set for either 120 or

220 film.

★ Be sure to align the lock pins with the holes on the pressure plate. The selected film

type will be visible through the window on the pressure plate and will be displayed

on the LCD of the magazine when the roll-film insert is loaded.

A roll of film can be inserted into the magazine whether the magazine is installed onto

the camera body or not.

29 30

Film path

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Comments to this Manuals

No comments

Mamiya 645 AFD III User Manual Page 16

Comments to this Manuals

Related products and manuals for Cameras Mamiya 645 AFD III