Mamiya 645 AFD III User Manual download pdf (Page 42)

81 82

When taking photos using infrared film, the position at which the subject is in focus is

slightly different than that of regular film. This is because the infrared rays have a longer

wavelength and the image converges behind the film plane of regular film. Use the pro-

cedure described below when taking photos using infrared film.

1. Set the focus as usual. Read the point on the distance scale matching the center

index of the depth scale.

2. Set the focus mode selector lever to “M” (manual focus mode). Turn the focusing ring

clockwise and align the read point to the infrared index.

★ Use a red filter when taking photos using infrared film.

★ Be sure to read the infrared film’s usage instructions.

★ You cannot take photos in AE modes when using an infrared film.

Infrared Photography Flash Photography

In addition to its standard flash sync system, the Mamiya 645 AFD

III

features TTL (through the

lens), off the film (OTF), electronic flash exposure metering. A flash sensor located inside the

camera body reads the flash reflected off the film surface at the moment of exposure. The

sensor is connected via the Mamiya 645 AFD

III

s dedicated hot-shoe to a shoe- or handle-

mount style Metz flash unit via the Metz SCA 3952 TTL Adapter. Maximum flash sync speed is

1/125 sec., making daytime synchronization possible.

The ISO of the flash is automatically set through the TTL connection from the camera's Film

Magazine; any adjustment to this is instantly recognized after the setting is locked and the

shutter release is half-pressed. Also, when Film Magazines with different ISO settings are

switched on the camera body, the TTL flash connection instantly recognizes the change.

To utilize the TTL flash feature with all TTL-operable Metz flash units, a Metz SCA 3952 Mod-

ule is required. Please see the chart below for compatibility and/or additional adapters that

may be necessary.

The resulting flash exposure automa-

tion determines correct flash expo-

sure and automatically adjusts the

output of the flash. It also automati-

cally corrects for exposure compen-

sation normally required when using

filters, close-up bellows or extension

tubes. However, as with all TTL sys-

1. Mount the SCA3952 adapter onto the Metz

flash, insert fully into the camera’s hot shoe, then

tighten with the locking knob A.

2. Set the exposure mode, then check the shut-

ter speed and aperture.

tems, it requires manual compensation for differences in film surface reflection characteristics.

The amount of compensation is determined by experimentation and is performed on the Mamiya

Film Magazine ISO setting.

★ With TTL flash photography, the reflection of the flash is metered and the intensity of

the flash is adjusted automatically, so TTL flash photography may not be able to suit

to all conditions. In the cases described below, we recommend that you use a flash

meter to check the intensity of the flash or to use a manual flash setting.

Exposure mode Shutter speed Aperture

P Program AE

Automatically set by camera to 1/60 sec. when

the metered shutter speed is 1/60 or slower, and

1/125 when it is 1/125 sec. or faster.

Automatically set

by camera

Av Aperture priority AE Any aperture

Tv Shutter priority AE

Automatically set by camera to 1/125 when the

set shutter speed is 1/125 sec. or faster.

Automatically set

by camera

M Manual mode Any aperture

X Synchro mode 1/125 sec. Any aperture

Adapter

Type of Flash

SCA3952

Module

SCA3000C

Converter

Metz Flash Unit

Metz 44 MZ-2 Shoe-mount x

Metz 54 MZ-3 Shoe-mount x

Metz 45 CL-3 and -4 Handle-mount x x

Metz 60 CT-4 Handle-mount x x

Metz 70 MZ-5 and -4 Handle-mount x

22 2211 1144

21. 5 3

510

11144 11144

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 55 56

Comments to this Manuals

No comments

Mamiya 645 AFD III User Manual Page 42

Comments to this Manuals

Related products and manuals for Cameras Mamiya 645 AFD III