Mamiya 645 AFD III User Manual download pdf (Page 13)

★ When the camera is set to sleep mode during the setting procedure, the flashing

display is cleared, and no further settings can be performed. If this happens, press

SET button

A again.

★ The camera automatically cancels the date and time setting mode when it is not

operated for 60 seconds, and the changes will not be saved.

★ When not in the CF exposure mode, if the set button is pressed for approximately

two seconds the display will show the index number. Press the set button again to

check the date and time.

23 24

Setting Date and Time

1. Turn on the power.

Set the shutter release mode selector lever to “S”

or “C.”

2. Turn the front dial, and select custom number

C-34.

3. Press the SET button.

When SET button A is pressed, the mode

changes to the date setting display.

★ The dial can be turned either way to select the desired function number.

4. Press the set button

After pressing the set button A, the display will

change to the date setting mode.

5. Turn the front and rear dials to set the date and

time.

Turn the front dial to select "month-date-year" or

"hour-minute" and change the value by turning

the rear dial.

6. After the date and time are set, press the set

button A for approximately one second to store

the settings.

Put the neck strap through the mounts and

secure it using the buckle as illustrated.

Strap

★ After attaching the strap, pull it and make sure it does not loosen at the buckle.

Setting Date and Time / Strap

Caution

■ To ensure safety, pull the ends of the strap taut, and check that they are

fastened securely to the metal mounts on the camera.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

No comments

Mamiya 645 AFD III User Manual Page 13